Connected paint booth: cost, energy use and CO₂
A body shop's paint booth connected with IoT: cost per hour and per part, LPG use and CO₂. The Sinnek and Mottiva pilot, built on coppioT.

- Who
- A RACC-AXA body shop in Barcelona
- What was connected
- An LPG paint booth, with the coppioT kit
- What it sees now
- Cost per hour and per part, booth use and CO₂
Sinnek, from the Bernardo Ecenarro group (BESA), is a leading Spanish brand of vehicle refinish paint: around 1,200 body shops work with it in Spain and more than 3,000 worldwide. On 5 May 2026 it launched Mottiva, its network of body shops, which signed up 42 shops in its first five months and aims to pass 200 within five years. It’s an ambitious challenge, and we wish them every success.
This collaboration was made possible by Víctor Castelló, of Iddonia, and Fernando Miguélez, general manager of GANVAM.
The challenge
Sinnek had shown in the lab, with limited data, that its paint is more efficient. It needed to prove it with real data, in a body shop’s day-to-day work. And it wanted to offer the same to its customers: each shop comparing the paint’s efficiency and quality with its own data, and gaining productivity from the IoT system installed with Sinnek and Mottiva.
The pilot was the paint booth of a RACC-AXA body shop in Barcelona, which runs on LPG.
What we did
- We started with the goals: what Sinnek and the shop wanted to achieve, and which data would prove it.
- We studied the booth and chose the sensors: temperature (PT100), humidity, differential pressure, outdoor conditions, three-phase electricity and LPG consumption.
- We made the proposal, installed the kit and programmed it (how it works), without redesigning the booth.
- We built it with coppioT, which sets up the whole infrastructure on AWS and is where we maintain and change the system. That makes it scalable and quick to start, and it costs the customer far less than a custom-built solution without coppioT.
- The data is stored on AWS and the shop looks at it in Grafana dashboards. We don’t charge for the charts or the reports.
- We handed over the IoT system working 100 %.
What the shop sees: booth cost, energy use and CO₂
- Real values, not estimates: what the LPG and the electricity cost, the cost per hour and per part, and a cost projection.
- The booth’s performance: how long it works, how long it stands idle, and its efficiency.
- The environmental impact of consumption, in kg of CO₂ equivalent. It comes from conversion factors, so it’s an approximation.
- The status of the booth and the burner, with alarms and alerts.
- Small inefficiencies nobody saw before: the booth holding its temperature for up to two hours with no need, or using LPG and electricity with no activity.
More on how it is measured: real-time energy consumption monitoring.
How the booth looks in Grafana. Fictional data, to protect the customer’s confidentiality.
Today Mottiva offers the shops in its network booths that come connected, or connecting the one they already have, adapting it if needed.
What is usually achieved
- −32 % in gas
- −18 % in electricity
- +43 % in process optimisation
- +28 % in productivity
- −17 % in overall consumption
This kind of investment is estimated to usually pay for itself within the first year, through the savings and the higher productivity.
Indicative figures: they depend on each installation.
What’s next
With the data the shop already has, the next step is for the system to work on it by itself:
- Automatic, interactive reports: this week against last week and against the month.
- Agentic IoT: asking the booth how the week went, in a chat, and getting alerts without having to look at the charts.
- The energy the booth needs to raise each degree, adjusted for the outdoor temperature. If it shoots up, it raises the alert: it may be the burner, the filters or a door.
- When painting is cheapest, from that same figure: at what time of day and in which season.
Coming soon. Preview with sample data.
Thank you
- Jesús Berruezo, Business Development Manager, and Gustavo Hoyos, technical director, at Sinnek, for trusting us.
- Víctor Castelló, of Iddonia, where it all started.
- Fernando Miguélez and Tania Puche, of GANVAM, for recommending us.
- Germán Carballo, head of AXA’s body shop network in Catalonia, who opened the shop’s doors for the pilot.
Our LinkedIn post on the Mottiva launch (in Spanish).
Want to see your booth or your machine like this? Ask for a demo.