Remote machine monitoring vs remote access (VPN)
Remote access over VPN isn't remote monitoring. What each gives you, why industrial IoT shows what happened when nobody was watching, and how to use both.
News, tutorials and insights on industrial IoT from the coppioT team.
Remote access over VPN isn't remote monitoring. What each gives you, why industrial IoT shows what happened when nobody was watching, and how to use both.
Industrial IoT security with coppioT: no inbound firewall ports, a certificate per gateway and an isolated cloud environment for each customer.
What OEE is, the OEE formula with a worked example, and how to get it in real time from the PLC, with no spreadsheets and no manual operator input.
Energy consumption monitoring that pays off: energy per part, cost per hour, idle consumption, peak demand and power factor, read live from your meters.
Connect legacy machines to the cloud without redesigning them: through the PLC, its signals or a new sensor. What each path needs and what data you get.
What IIoT (the Industrial Internet of Things) is, how an IIoT system works, which sensors you need and what IIoT monitoring gives a factory.
How to set up energy monitoring in a manufacturing plant: where to put the meters, which devices you need, how they are read and what to look at first.
What real-time industrial IoT monitoring is, which signals to watch, how to set up alerts people act on and how to roll it out in a plant, step by step.
How to design an industrial IoT dashboard people check every day: who it is for, how many indicators, colours that call for action and how to build it.
What Industry 4.0 is, which technologies make it up and which to start with: a small first project, one specific problem and data from your machines.
How OPC UA and Modbus TCP differ, which one to use with a PLC, an energy meter or a compressor, and why most plants end up running both.
Which plant data is still written down by hand, where it can be read automatically, and how to move from paper and Excel to automatic data, step by step.
How a machine builder ships every machine already connected, sees its whole fleet from anywhere and offers IoT to its customers as a service.
How to reduce a plant's energy consumption step by step: baseline, idle consumption, peaks, expensive hours, water and gas, and checking the savings.
How to reduce unplanned machine downtime: log every stop from the PLC automatically, find the causes that weigh most, track MTBF and MTTR and get ahead of failures.
No-code vs low-code IoT platform: what "no programming" really means in industrial IoT, step by step from the PLC to the cloud, and when low-code isn't enough.
Industrial IoT predictive maintenance: how it differs from preventive, which machine signals work and how to start with a single machine, without programming.